A NEW choice for snooker and billiards equipment!
Signed in as:
filler@godaddy.com
You're looking for a new cue?
Here is some advice to help you decide what's best.
There are countless players looking for new cues every day. For some it's easy but for others it seems a near impossible task!
If that is you it's important that you read the content below.
The good news is the brand we sell are well established and have great reputations for consistently making excellent cues. When choosing a cue from our website you know you're buying quality.
You can be safe in the knowledge that Green Baize GBL Cues are all widely used by professional players.
General Cue Advice
Cue Size Guide
Tip size – Most used 9.25mm – 9.75mm with 9.5mm being preferred by many.
To give an idea of tip size differences – 0.10mm is the thickness of a piece of paper.
Choosing a tip size is a personal preference. There's not a right or wrong, it's what works best for you that counts.
*Please note choosing a tip size that must be exact size is extreme, a tenth of a millimetre under or over size your ideal size will not make any difference to how the cue plays or feels. Remember it's the thickness of a piece of paper.
Something to check– Players using the same cue for many years could be using near 9mm or even less without knowing, the cause is usually a combination of re-tipping and constant cleaning of the ferrule using an abrasive paper.
Weight – Most used 18oz – 19oz with 18oz – 18.5oz being the most popular
To give an idea of weight differences – A block of chalk weighs 0.6oz
Choosing a preferred weight is personal preference. There isn't a wrong or right, it's what works best for you that counts.
*Please note when choosing a weight that must be exact is extreme, 0.2oz under or over your ideal weight will not make any real noticeable difference to how the cue plays or feels. Remember it's a third of a block of chalk.
Length – Most players use 57″- 59″with 58″being the most popular.
This can only be a rough guide to length, the reason being it's not just height that has to be taken into consideration to find a suitable length of cue. We all have different body frames! Skinny, big, long arms, short arms I could go on, but I guess you've got the idea.
Technique / stance also is a factor.
The golden rule is never use, a cue that is too short, this will stop you giving a correct delivery through the cue ball and hinder what you can do on the table. The good news is you will know when a cue is too long for you!
It's not good to hold the cue right at the end, most players hold roughly 1″down. This extra length enables players to lengthen up their technique to play power shots, it's also very helpful when stretching to play shots just out of reach.
How to check what cue length is suitable
Take up stance as if you were about to play a shot.
Make sure your cueing forearm is vertical /90 degrees to floor.
Tip of your cue nearly touching the cue ball, cue ball distance should be about 10" - 12” to the v of your bridge hand. This will ensure you have enough length for a full cue action. Ideally you require about 1” of spare cue past your grip hand so you can lengthen up your stance for power shots.
The 10" - 12” measurement for bridge distance isn't set in stone as some players prefer it to be longer or shorter. This information will give you a good indication to how long your cue needs to be.
BUTT DIAMETER– THIS IS THE MEASUREMENT ACROSS THE VERY END OF THE BUTT FROM SIDE TO SIDE. STANDARD BUTT DIAMETERS ARE BETWEEN 29MM – 30MM THIS SUITS MOST PLAYERS.
BALANCING POINT– THIS IS THE POSITION THE CUE BALANCES AT WHEN HORIZONTAL.
This will determine how a cue feels in your hands. Some players prefer a rear weighted cue while others like the weight to feel further forward. Like so many things about a cue it's a personal preference. Lots of things can influence a balancing point, joints, natural densities of woods, shaft and butt size and tapers. It's all very subjective.
The problem with balancing points is they can be misleading, but as a rule if you like to feel some weight in your grip hand 16.5″or less, if you prefer a more evenly balanced cue 17″- 18” is good, forward weighted go for 18″or more.
WHICH SHAFTS ARE THE BEST?
Why do I pay more for a cue because of shaft grade.
Good cue makers who grade shafts correctly will charge you more for stronger shafts with better visual grain pattern. The most important factors are a combination of – Strength – Density / Weight – Flex / Spring.
Strength– A shaft must have good strength to be able to produce a good strike and reaction with the cue ball. Shafts with more strength usually produce less deflection.
Density / Weight–Shaft density is important because this creates natural weight and strength in a shaft. This contributes to a more solid strike and better reaction with the cue ball.
Have you ever used a cue which feels light on the bridge hand, when striking the cue ball feels hollow? These shafts tend to have quite a lot of flex, the playability of the cue will be limited when shafts have a lack of natural weight and density.
Flex / Spring– Shafts need to be strong, so a shaft that is easy to bend isn't ideal.
The best shafts have good strength but also a bit of flex which creates spring, this is what helps to get a good reaction with the cue ball, making creative shots easier to play.
Visual Grain– For some players is very important for others less. The grain pattern isn't what makes the cue play well, visual grain pattern is personal preference. You will pay more for cues with good visual grain because it is a contributing factor when grading shafts. Perfect visual arrows can be difficult to find.
Remember this– The best cue makers know how to select the best shafts, and grade them accordingly.
Only cue makers with knowledge and experience can do this well.
Top Tip – For players that prefer shafts with feel and some flex.
Choose from GBL Classic range. These cues have selected shafts that will be more suitable for you.
Premium & Ultimate shafts are stiffer.
I HOPE YOU'VE TAKEN THE TIME TO READ THE ABOVE INFORMATION, HOPEFULLY THIS WILL GIVE YOU SOME HELP AND GUIDANCE TO FINDING A SUITABLE CUE. SPECIFICATIONS ARE MORE ABOUT SIZE AND COMFORT THAT ARE PERSONAL TO YOU, TAKING INTO CONSIDERATION WHAT SPECIFICATIONS ARE THE SAFEST / BEST TO USE FOR PLAYABILITY.
Also here is an example for you to think about. Why it's so difficult to replace your old faithful cue?
We once had 8 cues created with the same design and specifications. You might assume that they would all be identical, right? Well, that's far from the truth.
While their design and specifications matched, the cues varied significantly in terms of how they felt and played. Some cues shared similarities in their playing characteristics and sensations, but the majority of them were quite different. Surprisingly, despite all weighing 18 ounces, some cues felt lighter or heavier than others. This discrepancy can be attributed to variations in weight distribution within the cue and the varying weight of the wood used.
Additionally, even though the tip sizes were uniformly 9.5mm, when playing with the cues, some seemed thicker or thinner than others. This phenomenon is influenced by the grain pattern present in the wood, which can create an optical illusion.
Furthermore, some cues gave the impression of being longer or shorter than others, despite all of them measuring 58 inches. These differences can be caused by various factors.
These examples serve to highlight that having a cue made to your exact specifications does not necessarily mean it will be the right fit for you.
In depth.
Why is it so difficult for me to settle with a new cue?
It comes down to a combination of experience & expectation.
The most common specifications players choose are tip size around 9.5mm, standard length 58″, weight between 18 – 19oz. For most players keeping to these specifications will do the job fine.
If you are struggling to find a suitable playing cue after several attempts my advice to you is to visit us, we have a great selection of cues in our showroom.
You can compare and test cues out to find what feels and plays well. Our experience is that players often have fixed ideas on what they want in terms of specifications and design, the opportunity to try different cues often ends up with players finding a cue they love, with specifications they would never have considered without trying.
We are available to help and give advice when required.
How a cue plays with off centre striking – Deflection
I believe deflection is probably one of the most contributing factors to why players can or can't get on with a new cue.
When a player is looking for a new cue, they generally have an idea of design, size, length, and weight but deflection is never mentioned.
Stiffness of shaft is brought up by some players, but that doesn't always give a true indication to how the cue will play. Players with knowledge about cues will have learned that a cue with a stiff shaft will create less deflection, or that is what they are led to believe, the fact is this can be inconsistent.
There are cues with stiff shafts that produce a lot of throw / deflection and cues with flex in the shaft that produce very little throw / push / deflection. A high percentage of cues with stiff shafts play well, they tend to keep the line of the shot better than shafts with more flex.
A cue with a lot of deflection is difficult to use, it's less forgiving when accidentally striking the cue ball off the centre line. A cue with less deflection is easier to use, players can adapt quickly because it's more forgiving when accidentally striking off the centre line.
How To Test Deflection
We do deflection tests on cues day in day out in the shop, this is to help give an indication of how the cue plays.
Test your own cues deflection to see how much throw / push / deflection your cue produces; you might be surprised !!
You can check your current cue to see how much deflection the cue is producing by placing the cue ball on the brown spot. Address the cue ball to play down the line of the spots (brown to black). The cue ball should travel straight. Now repeat this process using side spin (left or right). The amount that the cue ball curves away from the line of the spots indicates how much deflection that the cue has. The cue must be kept parallel to the centre line to avoid natural compensation, but this may feel unnatural (I hope this makes sense). When striking the cue ball keep your cue on the line of aim so you should finish your stroke tip towards the side of the black spot you've been addressing. The speed to play this stroke is lag pace, that means you want the cue ball to return to the baulk area. Repeat this a few times to check consistency.
Things to take into consideration when doing this – make sure you keep the same height / position when you strike through the cue ball. Height is very important, when striking below centre you create drag which lessens the deflection and creates pull, striking above centre will create slightly more deflection, so try and keep to central height for best results.
After doing this you will have had the chance to see how your cue is reacting using side and the deflection being created. This is one of the main reasons that players can or can't get on with new cues. Players with experience have an expectation as to how they expect a cue to play when using side or shots at distance, any difference in deflection will be more noticeable.
A cue with high deflection is more difficult to play with. Although players will get used to them over time and learn to compensate for the higher deflection, this inevitably leads to a lack of consistency. I have found that very good players who use cues with a lot of deflection need to practice more regularly to keep their standard of play high and consistent. A cue with little deflection is easier to get used to. Players benefit from this because it can allow them to play without having to adjust so much from the line of a shot when using side spin.
Most cues will naturally create some deflection, about half a ball (the edge of the cue ball will go over the black spot) when doing the deflection test correctly.
Less than half a cue ball is good, very few cues produce no deflection.
Most players don't strike through the centre of the cue ball when meaning to do so, having a cue with low deflection is forgiving as it reduces the effect of unintentional side.
Some of you are thinking that type of tip and shape of tip will have an influence.
Yes, you are correct, ideally the tip fitted is well shaped (slight dome) and bedded in or at least firm.
Question – Can I reduce the deflection my cue is producing?
The answer to that is yes – Century titanium ferrules are now available.
These can be fitted at our premises. ( Checkout information – Alterations & Repairs )
I don't know the full science behind them but what I can tell you is I've already tested well over 30 cues deflection before fitting and after fitting and without exception every cue has produced less deflection after a century titanium ferrule has been fitted.
After fitting I can honestly say that the overall playability was improved, in terms of feel and reaction with every cue, some of the cues I tested played well before and after a titanium ferrule was fitted, but these all benefitted from reduced deflection.
A big positive to Titanium is it's lightweight, extremely strong, and durable, no need to worry about a ferrule being damaged or reducing in size with repeated re-tipping.
I can't see any negatives to using titanium ferrules.
Please take note– Anyone who is considering having a Century titanium ferrule fitted to your current playing cue. If you are playing well and happy with how your cue is playing, my advice is don't fix what's not broken. Fitting one of these will change the way your cue plays!
Updated / additional information regarding Titanium ferrules.
The benefits of Century titanium ferrule are they reduce the deflection a cue produces when striking off the centre line of the cue ball. (Using side)
This means when unintentionally striking off the centre line of the cue ball you will hold the potting line of the shot, instead of the usual consequence of pushing the cue ball off the potting line. Cues producing high deflection will punish you for inaccuracy, causing more missed balls. ( Deflection / push causes a thick contact on the object ball )
Also, when playing long shots with side spin less of an adjustment is made when choosing an aiming point to make the correct contact point on the object ball.
( You don't need to aim so far away from the true line of the shot )
When playing on different types of cloths in varying states of wear ( table conditions ) this will help to make things easier, more forgiving.
It's not just potting that improves.
Thin contacts for safety become much easier, the chances of a thick contact on the object ball are massively reduced.
I've now tested well over 500 cues which were original brass then changed to Century titanium and without exception every single cue a Century titanium ferrule has been fitted to the deflection has been reduced, I still can't explain exactly how or why this works but it does.
Once fitted cues produce less deflection and more spin.
Another benefit is titanium is extremely strong, brass ferrules are prone to losing size, with general wear and tear (re-tipping is the usual culprit for this, or constant cleaning the ferrule)
Titanium ferrules won't wear away like brass ferrules, even when deliberately trying to cut into a titanium ferrule to reduce size it's virtually impossible to do this, they are unbelievably strong.
Lots of positives.
I will say if you are thinking of changing your own personal cues ferrule to titanium, things to take into consideration are.
Brass is easy to manipulate, the brass can be taken back to be flush with the wood, this isn't possible with titanium, the wood always needs to be taken back to the titanium, or when possible fitted flush on original fitting.
Please note – Changing from brass to Century titanium will change the way your cue plays, so if you're currently happy with how your cue plays why change it?
You need to make a balanced decision taking into consideration your potential reasons for changing.
I always think if it's not broken, don't fix it.
When making the decision to change it takes time to fully transition. For some players this is a quick and easy transition, for others it will take longer.
I believe that it is worth this period of learning.
We have tested several titanium ferrules that aren't genuine Century titanium. We have found that these ferrules don't lessen deflection or generate spin anything like as well as a genuine Century titanium ferrule.
My advice is stick to Century titanium ferrules; these are 100% guaranteed to work.
The above information and advice written by Stu Green, Green Baize Ltd.
We offer by appointment 7 days a week an opportunity to 'try before you buy' for as many hours as it takes to be comfortable you've found the perfect Cue for you!
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.